Sewage treatment silo flow measurement requires a waterproof electromagnetic flowmeter that remains stable in humid, corrosive, and submerged conditions. It is designed for conductive liquids such as raw sewage, sludge, and treated effluent. Key technical parameters include nominal diameter from DN25 to DN1200, flow range 0.3-12 m/s, accuracy +/-0.5% or +/-1.0%, and repeatability +/-0.15%. The liner can be PTFE, PFA, or hard rubber to resist abrasion and corrosion. Electrodes are usually 316L stainless steel, Hastelloy C, titanium, or tantalum according to water quality. The body protection grade should reach IP68 for silo pits and outdoor chambers, with waterproof sealing and submersible cable glands. Medium temperature is commonly -20 to 120 C, and pressure rating is 0.6-4.0 MPa. Flange standards can be GB, DIN, ANSI, or JIS, and the enclosure should resist moisture, dust, and temporary immersion. Conductivity should be at least 5 uS/cm. Outputs include 4-20 mA, pulse, and RS485 Modbus, with optional HART. Power supply can be 220 VAC or 24 VDC. The meter features an empty-pipe alarm, low-flow cutoff, self-diagnosis, and bidirectional measurement. The display should be sealed and readable in damp environments. Installation needs straight pipe sections of 5D upstream and 3D downstream, full-pipe flow, and reliable grounding. A waterproof electromagnetic flowmeter with these parameters improves dosing control, reduces maintenance, and supports stable sewage treatment silo operation.

Mixing Station Material Tank E
Grain and Oil Storage Tank Rod
Power Plant Storage Tank Flang
Port Hoist Intrinsically Safe