Water conservancy corrosion-resistant radar sensors provide reliable non-contact measurement in rivers, reservoirs, canals, and pumping stations. Their working principle is based on frequency-modulated continuous wave (FMCW) radar. The sensor emits a high-frequency microwave signal toward the water surface and receives the reflected echo. Because the transmitted frequency changes continuously, the time delay of the echo produces a frequency difference. The sensor mixes transmit and receive signals, then calculates distance from this difference. Water level is obtained by subtracting distance from the known installation height. The radar beam is narrow, so it can avoid banks and walls. A temperature sensor compensates for changes in air dielectric properties. Advanced signal processing filters wind waves, rain, floating debris, and structural vibration. Corrosion resistance is achieved through sealed housings, PTFE or PVDF antenna covers, stainless-steel brackets, and IP68 protection. The corrosion-resistant radome protects the antenna without blocking microwave energy. These materials resist moisture, humidity, chemicals, silt, and algae while maintaining stable microwave transmission. The measured level and flow data are sent to SCADA or telemetry systems for flood warning, irrigation control, and reservoir management. This design enables stable operation during floods, dry seasons, and corrosive atmospheric conditions. Regular cleaning and calibration ensure long-term accuracy in harsh water environments.

Mixing Station Flange-mounted
Grain and Oil Storage Tank Rad
Power Plant Non-contact Radar
Port Intrinsically Safe Explos