Sewage treatment plants require reliable level measurement in wet, corrosive, and dirty environments. A waterproof radar sensor uses non-contact 80 GHz radar technology to measure wastewater, sludge, and chemical liquids without clogging. Its sealed IP68 housing and PVDF/PTFE antenna resist moisture, H2S, and fouling.
Key technical parameters include a measuring range of 0.3 to 20 m, accuracy of +/-2 mm, beam angle of 8 degrees, and frequency of 80 GHz. The sensor operates from 9 to 36 VDC with 4-20 mA, HART, or RS485 Modbus output. Process temperature is -40 to 80 C, process pressure is -0.1 to 0.3 MPa, and protection class is IP68. Repeatability is +/-1 mm, resolution is 1 mm, and output load is up to 500 ohm. The antenna and lens are made of corrosion-resistant PVDF/PTFE, suitable for sumps, equalization tanks, aeration basins, and sludge tanks. Response time is fast, and the measuring interval can be configured for continuous monitoring.
Installation should avoid foam, agitators, and tank walls. A stable bracket and correct blind zone setting improve accuracy. The sensor supports cable length up to 100 m and transient protection for outdoor use. Optional display, mounting thread G1 1/2, flange connection, and Ex ia IIC T6 protection are available for project requirements. Regular lens cleaning and parameter verification maintain long-term performance. With waterproof construction, corrosion resistance, and accurate radar measurement, the sensor supports stable operation, low maintenance, and efficient sewage treatment control.

Mixing Station Flange-mounted
Grain and Oil Storage Tank Rad
Power Plant Non-contact Radar
Port Intrinsically Safe Explos