Gate corrosion-resistant magnetostrictive level gauges are built for continuous liquid-level measurement in aggressive chemical, wastewater, and process tanks. Their technical parameters balance durability, accuracy, and flexible system integration. Standard measuring ranges are 300–6000 mm, with accuracy of ±0.5 mm or ±1 mm and resolution of 0.1 mm. The probe is typically 10–12 mm in diameter and made of 316L stainless steel, optionally covered with PTFE or PFA for acid, alkali, and solvent resistance. Process connections include DN50 PN16 flanges or threaded options. Process temperature can reach -40–120°C, while pressure ratings are 1.6–2.5 MPa. Output signals include 4–20 mA, HART, RS485/Modbus, and relay alarms. The unit operates on 24 VDC, supports a load resistance of up to 500 Ω, and offers IP65/IP67 protection. Explosion-proof versions meet Ex d IIC T6 for hazardous areas. Ambient temperature is -20–60°C, and the electrical entry is M20×1.5 or 1/2 NPT. Repeatability is ≤0.05% FS, response time is under 1 s, and storage temperature is -30–70°C; local LCD display and HART/Modbus calibration simplify commissioning. A small top and bottom blind zone, stable linearity, and high repeatability support reliable inventory and control. Float materials such as 316L, PTFE, and titanium are selected according to media density and viscosity. These parameters make the gauge suitable for corrosive media requiring magnetic float operation, sealed stainless-steel construction, and long-term stability.