Radar sensors are increasingly used in mixing station material tanks to provide continuous, non-contact level measurement. In concrete batching plants, cement, fly ash, mineral powder, and aggregate bins often generate heavy dust, condensation, and material build-up. Traditional mechanical level devices may jam or require frequent maintenance, while radar sensors measure distance by transmitting high-frequency microwave pulses and analyzing reflections. This makes them suitable for harsh silo environments.
For field application, the sensor is usually mounted on the tank top, centered away from the feed inlet and discharge flow. A lens antenna or protected horn helps resist dust and condensation. During commissioning, operators set tank height, full and empty levels, and output range. The sensor can output 4-20 mA or RS485 signals to the PLC, enabling real-time display, automatic alarm, and interlock control. The measured value is displayed on the control room screen and can trigger high-level and low-level alarms for safe feeding. Accurate level data supports batching accuracy, prevents overflow and material shortage, and reduces manual dipping.
To ensure stable operation, keep the antenna clean, check false echoes, and verify parameters after material changes. Proper grounding and shielding reduce electrical interference. Regular inspection of mounting seals also prevents dust ingress. With correct installation and routine maintenance, radar sensors deliver reliable performance in mixing station material tanks, improving safety, efficiency, and automated production.

Chemical Storage Tank Explosio
Shield Tunneling Storage Tank
Mixing Station Material Tank R
Grain and Oil Storage Tank Fla